Agriculture electric motor 3000W brushless with tire

AGRICULTURE WHEEL MOTOR 3000W

With this 3000W electric brushless wheel, you can convert any agriculture trolley or industrial rolling chassi  into electric. You can install a tire there in 4.00 - 10

This new technology makes it possible to tow a load up to 300kg.

 This brushless electric motor with direct drive technology is one of the most robust motors on the market, no maintenance required, high endurance and maximum efficiency.

Ideal for weeding beds, special machines, animal breeding, use in vineyards, fields with elevation. Organic farming without the use of fossil fuel, transport of bag of fertilizer, case of champagne, case of wine, fodder,

This assistance will help preserve your health and that of your employees by considerably reducing work effort. This will increase your work pace without forcing and allow you to carry out work previously impossible.

This Brushless motor for agricultural wheelbarrow must be powered with a Lead or Lithium 36V or 48V DC battery.

We decline this engine with two braking systems, one with a drum brake system (originally integrated with the wheel) and one with a disc holder (not supplied).

We offer a complete kit (controller, battery, control system) suitable for this engine which will allow you to add an electric motor to your vehicle in less than ten minutes.

Waterproof grade : IP65

OPTIONAL ACCESSORIES

CONTROLLER KELLY 70A KLS7212N

Supply voltage : 24V to 84V DC 

Dimensions : 125x84x47mm

IP66 ingress protection

AVAILABLE COMMANDS

This ebike accelerator is thumb operated. This model is mixed, that is to say that you can install it on the right of your handlebar as on the left. Ideal for off-road because you will have a better grip of your handlebar in the technical passages. To consult its product sheet, click here.

Three-position switch to attach to the handlebar of your bike and connect to the dedicated connector of the OZO dual sensorless / sensored controller in order to benefit from three different power modes which are programmed on 30%, 60% and 100% as standard.

Note that we can program the three power levels differently by custom programming the controller.

To consult its product sheet, click here.

Two-position waterproof multi-function switch. It can be used as an ON / OFF switch for your lighting or for your controller. Supplied without connector.

To consult its product sheet,click here.

FORWARD / REVERSE

• If you used the accelarator mode, your installation will move forward, if you want to use the reverse, you will be able to active the reverse a switch on the reverse connector.
• If you used the mode with a push button and a fixed speed, you will be able to connect a push button on the forward connector and an another push button on the reverse connector or installl a 3 positions joystick.

Accelerator stand straight or elbow shaped for wheelbarrow, cart, agricultural and industrial machinery.

To consult its product sheet,click here.

PLANE OF MOTOR

2D PLANE OF MOTOR (DRUM BRAKING)

2D PLANE OF MOTOR (DISC)