THE ACCESSORIES FOR YOUR CRANKSET ENGINE KIT
OZO has developed a range of accessories to add to your electrical kit to make its use even more enjoyable.
THE ACCELERATOR
The accelerator allows you to manually dose from 0 to 100% of the engine’s power, as on a moped. Note however that the use of the accelerator is not allowed on public roads beyond 6km/h.
BRAKE CUT-OFF HANDLE
The brake cut-off allows you to cut off power to the engine during braking. Although the engine shuts off as soon as you stop pedaling, brake cuts are safer in the city and for people with balance problems. You can decide to install a brake cut-off only on the rear brake or on both brakes. The choice of brake cut-off will be made according to the original brakes of your bike.
HYDRAULIC BRAKE SYSTEM
The MAGURA MT5E hydraulic braking system has been specially developed for e-MTBs. The 4-piston caliper allows efficient braking even on the most powerful electric bikes. Waterproof 2-pin connector - Normally open contact.
HYDRAULIC BRAKE CUT-OFF
Magnetic contact to activate the brake cut-off on your system while keeping your original hydraulic brakes. Also compatible with all bikes equipped with a Julet 2-way connector red or Higo.
CABLE BRAKE CUT-OFF
Contact brake handle compatible with OZO controllers. Supplied with 2-way waterproof Julet connector, red Z209, and compatible with equivalent Higo connector.
THE DERAIL SENSOR
The derail sensor allows you to turn off the engine during a gear change. Very practical on mountain bikes, where you often change several gears on the fly at once, the derail sensor prevents premature wear of the chain, sprockets and derail. Indeed, when the engine is in gear and you change gears, it’s as if you were cycling on your bike, the gears are difficult to change and the transmission will wear out quickly. The derail sensor prevents this wear. Please note that this accessory is compatible only with pedal motors.
5-HOLE TRAY ADAPTER
Allows 5-hole chainrings with Campagnolo 5x135 or Shimano 5x130 or 5x110 standard to be fitted on the Bafang BBS01 and BBS02 crankset engines. Allows the installation of two trays on the Bafang engine.
Part machined CNC in FRANCE and designed by OZO
4-HOLE TRAY ADAPTER
Allows the mounting of transmission plates to the standard MTB 4-hole (4x104 BCD).
Also offers the possibility to do a double assembly.
Note that installing a smaller chainring on your crankset engine will increase torque. For example, if you install a 34-tooth plate instead of the original 44 teeth, the torque gain will be 30%.
REINFORCED CRANKS
Pair of 175 mm reinforced cranks for Bafang BBS01, BBS02 and BBSHD cranks. Ideal for mountain biking or for cyclists over 90kg or for those who are used to riding with 175mm cranks.
The offset, 13mm offset compared to the original Bafang cranks, will prevent the crank from coming into contact with the rear base on some bikes as is often the case on fat bikes or Fatty.
EXTENSIONS
ACCELERATOR/PEDAL SENSOR 30cm/1m
BRAKE/LIGHTING CUT-OFF 30cm/80cm
DISPLAY 30cm/1m
THE SIMPLIFIED MAIN BEAM 60CM
A simplified main harness, allowing you to lighten your electrical assembly on your bike.
Y CABLES
BRAKE CUT-OFF
Allows you to install the derailleur sensor in addition to the two brake cuts
LIGHTS
The crankset motor has a serial light output. If you want to install a front light and a rear light on your bike, you will need to use this Y cable and provide an extension cable for the rear light.
THE LIGHTS
Your crankset engine kit has a light output, OZO offers you a range of front lights and rear lights compatible with your system. You will be able to control your lighting directly via the display selector and also benefit from the automatic day/night lighting function if you have the vertical color display that incorporates a twilight sensor.
THE TIRES
All the tires that we offer on our site have been selected to perfectly fit for use on an electric bike. These are the best tires classified by type of practice, whether for e-bikes, urban electric bikes, travel bikes, gravel bikes, commuters... So they are all perfectly compatible with our electric bicycle kits and all have puncture protection.
THE TOOLING PACK
Kit of tools to remove the original bottom bracket and install the Bafang crankset motor on your bike. You will find in this pack: 1 spanner, 1 hand crank extractor, 1 square axis box demounting.
THE REINFORCED CHAINS
KMC has developed a series of reinforced chains specially developed for pedal motors that exert more torque on the chain than on a traditional bike. These chains are essential if you have a 500W, 750W or 1000W crankset engine and are recommended for the 250W engine.
THE CHARGERS
Fast chargers, USB, solar.. OZO offers you a complete range of chargers for your Lithium batteries!
FAST CHARGER 10A
The 10A fast charger is only compatible with PVC batteries over 700Wh. It is not compatible with the water bottle battery or with frame batteries.
TRAVEL CHARGER
The lithium battery travel charger is a must-have accessory for e-bike users on the go. It offers a practical and effective charging solution, allowing you to recharge your battery wherever you are, using the cigarette lighter socket in your car or camper.
SOLAR CHARGER
300W solar charger with BOOST controller MPPT technology.
You can thus recharge your battery in the sun with a single solar panel.
