Bouton poussoir rond rouge

This red pushing button is expected to be installed on a handlebar or a 22mm tube.

On a bike or a motorcycle, it can be used to stop the motor when it's plugged in on the controller break brake or disactivate the speed regulatior or moreover activate the horn

On a cart, it can be used to drive the motor by pressure

Read moreShow less
€10.00 (tax incl.)
N STOCK 43 Items
Reference:
000544
You may also like
€14.00 (tax incl.)
Double positions siwtches handset for handlebar installation or 22mm tube. Delivered with a 2 ways JST connector and a 1100mm cable length
€19.00 (tax incl.)
This handset including two switches (2x positions switches) can be used to start the system or switch on the lighting or in order to select between the forward/backward motion. Suitable with every 22mm diameter...
€12.00 (tax incl.)
This push button is designed for installation on a 22mm handlebar or tube. On a bicycle or motorcycle, it can be used to ground the engine, deactivate the cruise control, or activate the horn. On a cart, it can be...
€19.00 (tax incl.)
Double combined for handlebar installation or 22mm tube. Equipped with two pushing buttons, this product is perfect for activating the forward or backward motion by pressure on an industrial cart, golf cart or any...
Product Details
000544
Reviews
No comments

Leave a review

  • Quality:
Describe this product using simple and short words.
Upload images:
Drop images here or click to upload.
Customers who bought this product also bought:
€20.00 (tax incl.)
Motor cable extender 45cm and 1m Extension for motor cable with 3x 2.00mm2 cables for the phases and 5x 0.22mm2 cables for the HALL sensors. The extensions are supplied with Anderson PP30 connectors for the phases...
€42.90 (tax incl.)
The puncture-proof tire.It offers the best protection against the risk of punctures but also the following characteristics: - rolling resistance (patented SmartGuard underlay)- recycling- anti-aging effect (special...
€8.00 (tax incl.)
This extension cable has a 3-way JST connector for pedal sensor or accelerator. With switch 3-Position. Available in 3 lengths : 30 cm 50 cm 100 cm
€28.00 (tax incl.)
The BOOST adaptation kit allows by the simple installation of these spacers to convert your current hub in 12x142 mm to the standard Boost 12X148 mm.
Close
Click for more products.
No products were found.

Settings

Click for more products.
No products were found.

Menu