€12.50
(tax incl.)
With 5-way JST box with 4 cables.Available in 50cm and 1m.
Chargement des images...
Cycle analyst V2 V3 analogger
This Analogger can be plugged on Jack connector of your CA V2 or V3 to record all datas of your system and travel ( for GPS integrated version).
€129.00
(tax incl.)
Reference:
001908
You may also like
€10.00
(tax incl.)
6-way extension cable cycle analyst
30cm
50cm
100cm
€45.00
(tax incl.)
16A Hall Effect Current Sensor for Solar CA V3 Firmware. This shunt is great for solar application such as long travel, suntrip... you will be able to check your production and consumption on the same CA V3 screen.
€41.67
(tax incl.)
Gift voucher worth 50 € to 200 €
Valid for 1 year on all products on the site
€45.00
(tax incl.)
Slim digital up and down pushing buttons for limit setttings by pushing buttons as pedal assist limit.
Requires a Cycle Analyst with version 3.1 or later firmware.
Connects to white 3-pins Aux plug on CA3 device.
€24.90
(tax incl.)
This USB charger converter allows to charge any smartphone or camera or GPS directly with any 12V 24V 36V 48V 60V battery.
Output is 5V 2A
Input voltage has to be between 10V and 60V
44x21x11mm
Easy to use
Cycle Analogger
Saves the Cycle Analyst output data to a MicroSD memory card. Data can be read with card reader or USB cable
Comes with:
- USB cable for PC
- DC power cable for connection to battery pack or Cycle Analyst
- Stereo audio Cable for data signal
- Data cable from CA (red to tx, black to gnd)
- 1GB MicroSD card
Dimensions: 80 x 40 x 19 mm
Supply Voltage: 10V - 100V DC
Customers who bought this product also bought:
€159.00
(tax incl.)
This OZO 35A controller is dual sensored / sensorless field oriented (FOC) sinusoidal mapping, which makes it compatible with all brushless electric motors equipped or not with hall sensors.
Temperature protection to...
€45.00
(tax incl.)
Slim digital up and down pushing buttons for limit setttings by pushing buttons as pedal assist limit.
Requires a Cycle Analyst with version 3.1 or later firmware.
Connects to white 3-pins Aux plug on CA3 device.
€199.00
(tax incl.)
The V3 Cycle Analyst is the next step for the CA product line to not only monitor what is going on in an ebike, but also control it. In the V2 CA we included basic throttle over-ride capabilities for speed, current,...
€39.00
(tax incl.)
Pas sensor for Cycle analyst V3 CA V3. Can be installed on left side or right side of your bike.
€599.00
(tax incl.)
OZO offers an extensive range of 48V Lithium batteries to tailor your electric experience.
Choose your battery capacity based on your range requirements. A 1000Wh battery will provide you with 33% more range...
€25.00
(tax incl.)
The base 3 is in stainless steel of 6.20mm thickness.
To check the installation of the torque arm on your bike, you can print the plan below, cut the part and position it on the frame.
Plan "Base 3 M12"
€249.17
(tax incl.)
This large direct drive motor has a steel stator 35mm wide and a solid axis in 14mm, which allows him to cash a max power of 2000W and to offer a large torque.
It will be perfect for the electrification of a scooter,...
Leave a review