20 inch electric motor 1000W - 1500W scooter kit or drift trike without battery
A 1000W - 1500W aluminum drive wheel, perfect for easily electrifying a drift trike, a scooter, a trailer, or any other rolling base. The aluminum wheel is designed to withstand heavy loads and high-stress applications.
Advantages of the 20" Scooter / Drift Trike Kit
This powerful kit allows you to add a high-performance electric motor to a scooter, a 20" wheel drift trike, or even a trailer. With a power output of 1000W at 36V and up to 1500W at 48V, it radically transforms your riding experience. Its ultra-robust aluminum wheel is perfectly suited for off-road use and transporting heavy loads.
HIGH POWER
Up to 1500W to overcome all obstacles
VERSATILITY
Compatible with Scooters, Drift Trikes, and Trailers
ROBUSTNESS
Solid aluminum rim to prevent spoke breakage
OZO EXPERTISE
Designed for intensive use and heavy loads
Kit Contents
THE 20" MOTOR
Aluminum Direct Drive motor (spokeless). Max torque 60Nm. Speed: 25km/h (36V) or 40km/h (48V).
35A CONTROLLER
FOC (Sine Wave) technology for silent operation. Regenerative braking and Cycle Analyst compatible.
THE THROTTLE
Ergonomic thumb throttle, installable on the right or left of the handlebar for precise control.
Battery and Range
OZO manufactures your 36V and 48V Lithium batteries in France using premium Panasonic cells. Our batteries are protected by a robust PVC casing against impacts and water.
Choose your range according to your needs: from 600Wh to 1500Wh for 48V configurations, allowing you to cover long distances even under intensive use.
.png)
Optional Equipment
- • Cycle Analyst V3: The ultimate on-board computer to configure your power and monitor your consumption.
- • Cut-off Button: To deactivate assistance instantly or activate a horn.
- • Silent Charger: Ultra-lightweight (200g) and completely silent charger for your travels.


Compatibility
The 20" wheel kit is compatible with most scooter forks and frames with a 100mm dropout spacing.
Simple check: Measure the internal width of your frame (value A). It must be at least 100mm (10cm) to accommodate the motor.
Data sheet
- Guarantee
- 2 ans
- Maximum speed
- 40 km/h
- Motor position
- Front
- Batterie
- None
- Tension nominale
- 36V / 48V
- Couple max en 48V
- 60 N.m
- Rendement
- 85%
- Technologie moteur
- Brushless direct drive
- Puissance max
- 1000W
- Technologie du contrôleur
- Sensorless
- Tension Max
- 48V
- Entraxe fourche min/max
- 100mm
- Motor Kv (RPM / V)
- 10 RPM/Volt
- Motor power range
- 1000W - 1500W
- Magnets height
- 30mm
- Hall sensors
- OUI
- Waterproof grade
- IP54
- Motor axle
- 14 x 10mm
Leave a review