0

Controllers

coupure frein câble connecteur jst coupure frein câble connecteur jst

coupure frein câble connecteur jst

€15.00 (tax incl.)
This brake cut is interesting for bicycles equipped with cable brakes and / or road handlebars or for those who wish to keep their original brake handles It is quick to install on the brake handle or caliper....
KELLY battery cable with 150A Anderson connector

KELLY battery cable with 150A Anderson connector

€35.00 (tax incl.)
Standard cable with special lugs for screw terminal block of KELLY controllers. Standard length: 35cm / Optional extension possible: 50cm, 1m,  Cable section: 10AWG / 5mm2 + after wired contact to switch on the...
KELLY battery cable with 50A Anderson connector

KELLY battery cable with 50A Anderson connector

€25.00 (tax incl.)
Standard cable with special lugs for screw terminal block of KELLY controllers. Standard length: 35cm / Optional extension possible: 50cm, 1m Cable section: 10AWG / 5mm2 + after wired contact to switch on the...
KELLY motor cable with XT150 connector

KELLY motor cable with XT150 connector

€35.00 (tax incl.)
Standard motor cable with special lugs for screw terminal block of KELLY controllers. Standard length: 35cm / Optional extension possible: 45cm, 1,1m. Cable section: 10AWG / 5mm2 + after wired contact to switch on...
Cycle analyst V3 Cycle analyst V3

Cycle analyst V3 DPS

€199.00 (tax incl.)
The V3 Cycle Analyst is the next step for the CA product line to not only monitor what is going on in an ebike, but also control it. In the V2 CA we included basic throttle over-ride capabilities for speed, current,...
Controller Kelly motor cable Controller Kelly motor cable

Controller Kelly motor cable

€25.00 (tax incl.)
Standard motor cable with special lugs for screw terminal block of KELLY controllers. Standard length: 35cm / Optional extension possible: 45cm, 1,1m. Cable section: 10AWG / 5mm2 + after wired contact to switch on...
Capteur pédalier V5 Capteur pédalier V5

Pedal sensor for generic OZO controller

€19.00 (tax incl.)
Pedal sensor compatible with the generic 250W controller for the repair of electric bikes. 2 models available: Integrated 12 magnets or V7 6 magnets The V7 comes with a 6-magnet magnetic washer. Cable length of 60...
Controller Kelly Battery cable Controller Kelly Battery cable

PP30 battery cable for kelly controller

€20.00 (tax incl.)
Standard cable with special lugs for screw terminal block of KELLY controllers. Standard length: 35cm / Optional extension possible: 50cm, 1m, 1.5m Cable section: 13AWG / 2,5mm2 + after wired contact to...
Intérupteur 3 positions 3 position switch for OZO controller

3 position switch for OZO controller

€15.00 (tax incl.)
Three-position switch to attach to the handlebar of your bike and connect to the dedicated connector of the OZO dual sensorless / sensored controller in order to benefit from three different power modes which are...
Boite ABS pour fixer les controleurs 17A sur le cadre Boite ABS pour fixer les controleurs 17A sur le cadre

15A 250W controller box frame mount

€12.90 (tax incl.)
This case will allow you to aesthetically fix your 15A 250W controller on the frame of your bike. The box is installed on the vertical frame tube using two clamps. Your frame tube should have a maximum diameter of...
coupure frein câble connecteur jst coupure frein câble connecteur jst

coupure frein câble connecteur jst

€20.00 (tax incl.)
This 33cm brake cut is interesting for bicycles equipped with cable brakes and / or road handlebars or for those who wish to keep their original brake handles It is quick to install on the brake handle or caliper....
cable Y JST 3 voies pour accélérateur cable Y JST 3 voies pour accélérateur

Y splitter cable 3 pins JST for throttle

€24.90 (tax incl.)
Y splitter cable to connect one throttle on both controllers. Allows to drive simultanouesly two motors with one throttle. 3 pins JST connectors compatible with OZO controllers 25A, 35A, 40A, 60A and Kelly...
Contacte magnétique pour frein hydraulique Contacte magnétique pour frein hydraulique

Hydraulic brake sensor

€20.00 (tax incl.)
Magnetic contact to activate the brake cut on your 15A or 22A system while maintaining your original hydraulic brakes. Also compatible with all bikes equipped with a 2-way Julet connector. Length 34cm
35A dual sensored/sensorless FOC controller 24V 36V 48V 35A dual sensored/sensorless FOC controller 24V 36V 48V

RH212 speedster OZO 35A controller 36V 48V

€169.00 (tax incl.)
The OZO 35A controller is specially designed for our speedster RH212 rear hub direct drive motor with waterproof connector Julet 1121AG. Can also fit front hub motor FH212 Only compatible with OZO vertical display...
Contôleur 12v Contôleur 12v

Controller 12V 15A brushless sensorless

€40.00 (tax incl.)
12V 15A controller to power a brushless motor operating in 12V. Sensorless only. Ideal for powering scooter motors in 5" or 6" The controller has the safety function "pedal first", that is to say that it is...
Capteur pédalier intégré pour contrôleur 15A et 22A Capteur pédalier intégré pour contrôleur 15A et 22A

12x magnets ring for pedelec sensor

€9.90 (tax incl.)
12x magnets ring for pedelec sensor. Brand : Kingmeter Drive side and opposite side available. For easier installation you can use our support available here
Rallonge moteur 9 PINS 110cm Rallonge moteur 9 PINS 110cm

Rallonge moteur 9 PINS 110cm

€15.00 (tax incl.)
Cable extension for electric bicycle hub motor with waterproof connector 9 Pins Julet Z910AT Available in three lengths: - 30cm - 45cm - 110cm
Accélérateur gachette au pouce Accélérateur gachette au pouce

Half handle accelerator with push button

€25.00 (tax incl.)
This "half-handle" type accelerator incorporates a push button that can allow you to turn the engine off when connected to the controller's "brake off" input or to disable the cruise control or activate the horn built...
Contrôleur 24V 13A Contrôleur 24V 13A

Mini scooter controller 36V 250W

€45.00 (tax incl.)
Mini scooter or kick scooter controller 36V 250W. Pedal first function, lcd display, active regenerative braking with throttle
Demi-poignée d'accélérateur avec bouton On Off Demi-poignée d'accélérateur avec bouton On Off

Half handle accelerator with 2 position button

€25.00 (tax incl.)
This half handle accelerator is compatible with all our kits. The two-position switch can be used to turn off the engine if it is wired to the "brake off" input of the controller or to power your lighting.
Qu'est ce qu'un Torque ARMS ? Qu'est ce qu'un Torque ARMS ?

Displays selection for wheel motor 250W to 750W

€79.00 (tax incl.)
OZO offers 3x different display models. The display is the screen on the ebikes handlebar. It shows all electrical and run datas such as battery state of charge, speed, distance and allows to select the assist power...
Contacte magnétique pour frein hydraulique Contacte magnétique pour frein hydraulique

Hydraulic brake sensor

€15.00 (tax incl.)
Magnetic contact JST to activate the brake cut on a bicycle equipped with hydraulic brakes. For 25A and 35A OZO controller You keep your original hydraulic brakes.

The controller (also called variator) is the brain of your electric bike motorization kit. It is an electronic case that manages the motor. The controller receives an information (control signal) from the pedelec or from the full twist throttle and manages the motor power according to this information.

All of our controllers initially include: Anderson Powerpole connectors for power, JST connectors for control, the possibility to connect a throttle or a pedelec, a cut off brake and a cycle analyst.

Our controllers for electric bikes can work with several voltages. This means that you can supply the controllers with various voltages 24V, 36V, 48V and even 72V for some models. To understand better the various controllers’ technologies, please have a look at our “technical information”page.

Read moreShow less
Close
Click for more products.
No products were found.

Settings

Click for more products.
No products were found.

Menu

Please sign in first.

Sign in