Three-position switch to attach to the handlebar of your bike and connect to the dedicated connector of the OZO dual sensorless / sensored controller in order to benefit from three different power modes which are...
This green pushing button switch is expected to be installed on a handlebar or a 22mm tube.
On a bike or a motorcycle, it can be used to stop the motor when it's plugged in on the controller break brake or...
This red pushing button is expected to be installed on a handlebar or a 22mm tube.
On a bike or a motorcycle, it can be used to stop the motor when it's plugged in on the controller break brake or disactivate the...
Double combined for handlebar installation or 22mm tube.
Equipped with two pushing buttons,one green and one red. This product is perfect for activating the forward or backward motion by pressure on an industrial...
The 2 positions selector coudl be used to start the system or switch on the lighting or in order to select between the forward/backward motion.
The red pushing bouton could be used to activate the brake...
Double combined for handlebar installation or 22mm tube.
Equipped with two pushing buttons, this product is perfect for activating the forward or backward motion by pressure on an industrial cart, golf cart or any...
Multifunction two-position switch.
It can be used as a forward/reverse switch, ON/OFF for your lighting, or for your OZO controller.
Supplied with a 2-way JST connector.
This push button is designed for installation on a 22mm handlebar or tube.
On a bicycle or motorcycle, it can be used to ground the engine, deactivate the cruise control, or activate the horn. On a cart, it can be...
his accelerator for electric bicycles is activated with the thumb.
Cable length: 1m
This model is versatile, meaning you can install it on the right or left side of your handlebar.
This set includes a waterproof...
This handset including two switches (2x positions switches) can be used to start the system or switch on the lighting or in order to select between the forward/backward motion.
Suitable with every 22mm diameter...
handset with one pushing button and one ON/OFF switch for handlebar installation or 22mm tube.
Delivered with a 2 ways JST connector and a 1100mm cable length
This electric bike thumb throttle is compatible with all Bafang mid-drive motor kits and OZO electric wheel kits in 250W, 500W, and 750W configurations.
It can be installed on either the right or left side of your...
his accelerator for electric bicycles is activated with the thumb.
Cable length: 1m
This model is versatile, meaning you can install it on the right or left side of your handlebar.
This set includes a waterproof...
Y splitter cable to connect one throttle on both controllers. Allows to drive simultanouesly two motors with one throttle.
3 pins JST connectors compatible with OZO controllers 25A, 35A, 40A, 60A and Kelly...
Thumb throttle with Battery indicator and ON/OOF switch for Ebikes.
You can install it on the right or Left side of your handlebar.
Available in two Voltage: 36V gauge or 48V.
OZO offers an extensive range of 48V Lithium batteries to tailor your electric experience.
Choose your battery capacity based on your range requirements. A 1000Wh battery will provide you with 33% more range...
ESS Lithium LFP OZO Battery 48V 10kWh LiFePO4 - Wheel Mounting
Compatible with most grid inverters or hybrid inverters such as Victron, DEYE, Growatt, SMA, Solis, Solark, Goodwe, Sungrow...
With this battery, no...