Filters
Switches and pushbuttons
€10.00
(tax incl.)
Multifunction interruptor with 2 positions
It can be used as a switch for your lighting or your OZO controller
Delivered with 2 JST ways connector
€10.00
(tax incl.)
Multifunction interruptor with 2 positions
It can be used as a switch for your lighting or your OZO controller
Delivered with 2 JST ways connector
€15.00
(tax incl.)
Three-position switch to attach to the handlebar of your bike and connect to the dedicated connector of the OZO dual sensorless / sensored controller in order to benefit from three different power modes which are...
€10.00
(tax incl.)
This green pushing button switch is expected to be installed on a handlebar or a 22mm tube.
On a bike or a motorcycle, it can be used to stop the motor when it's plugged in on the controller break brake or...
€10.00
(tax incl.)
This red pushing button is expected to be installed on a handlebar or a 22mm tube.
On a bike or a motorcycle, it can be used to stop the motor when it's plugged in on the controller break brake or disactivate the...
€14.00
(tax incl.)
Double combined for handlebar installation or 22mm tube.
Equipped with two pushing buttons,one green and one red. This product is perfect for activating the forward or backward motion by pressure on an industrial...
€19.00
(tax incl.)
The 2 positions selector coudl be used to start the system or switch on the lighting or in order to select between the forward/backward motion.
The red pushing bouton could be used to activate the brake...
€19.00
(tax incl.)
Double combined for handlebar installation or 22mm tube.
Equipped with two pushing buttons, this product is perfect for activating the forward or backward motion by pressure on an industrial cart, golf cart or any...
€15.90
(tax incl.)
Emergency stop button - red mushroom
Diameter : 22mm
Available with or without housing.
€12.00
(tax incl.)
Multifunction two-position switch.
It can be used as a forward/reverse switch, ON/OFF for your lighting, or for your OZO controller.
Supplied with a 2-way JST connector.
€12.00
(tax incl.)
This push button is designed for installation on a 22mm handlebar or tube.
On a bicycle or motorcycle, it can be used to ground the engine, deactivate the cruise control, or activate the horn. On a cart, it can be...
€19.00
(tax incl.)
This handset including two switches (2x positions switches) can be used to start the system or switch on the lighting or in order to select between the forward/backward motion.
Suitable with every 22mm diameter...
€14.00
(tax incl.)
handset with one pushing button and one ON/OFF switch for handlebar installation or 22mm tube.
Delivered with a 2 ways JST connector and a 1100mm cable length
€14.00
(tax incl.)
Double positions siwtches handset for handlebar installation or 22mm tube.
Delivered with a 2 ways JST connector and a 1100mm cable length
