0
Filters

Price

€0.00 - €210.00

Accessories for OZO 25A and 35A controllers

coupure frein câble connecteur jst coupure frein câble connecteur jst

coupure frein câble connecteur jst

€15.00 (tax incl.)
This brake cut is interesting for bicycles equipped with cable brakes and / or road handlebars or for those who wish to keep their original brake handles It is quick to install on the brake handle or caliper....
Cycle analyst V3 Cycle analyst V3

Cycle analyst V3 DPS

€199.00 (tax incl.)
The V3 Cycle Analyst is the next step for the CA product line to not only monitor what is going on in an ebike, but also control it. In the V2 CA we included basic throttle over-ride capabilities for speed, current,...
Intérupteur 3 positions 3 position switch for OZO controller

3 position switch for OZO controller

€15.00 (tax incl.)
Three-position switch to attach to the handlebar of your bike and connect to the dedicated connector of the OZO dual sensorless / sensored controller in order to benefit from three different power modes which are...
Accélérateur gachette au pouce Accélérateur gachette au pouce

Half handle accelerator with push button

€25.00 (tax incl.)
This "half-handle" type accelerator incorporates a push button that can allow you to turn the engine off when connected to the controller's "brake off" input or to disable the cruise control or activate the horn built...
Demi-poignée d'accélérateur avec bouton On Off Demi-poignée d'accélérateur avec bouton On Off

Half handle accelerator with 2 position button

€25.00 (tax incl.)
This half handle accelerator is compatible with all our kits. The two-position switch can be used to turn off the engine if it is wired to the "brake off" input of the controller or to power your lighting.
Contacte magnétique pour frein hydraulique Contacte magnétique pour frein hydraulique

Hydraulic brake sensor

€15.00 (tax incl.)
Magnetic contact JST to activate the brake cut on a bicycle equipped with hydraulic brakes. For 25A and 35A OZO controller You keep your original hydraulic brakes.
Capteur pédalier intégré pour contrôleur 15A et 22A Capteur pédalier intégré pour contrôleur 15A et 22A

12x magnets ring for pedelec sensor

€9.90 (tax incl.)
12x magnets ring for pedelec sensor. Brand : Kingmeter Drive side and opposite side available. For easier installation you can use our support available here
3-Way JST extension cable 3-Way JST extension cable

3-Way JST extension cable

€8.00 (tax incl.)
This extension cable has a 3-way JST connector for pedal sensor or accelerator. With switch 3-Position. Available in 3 lengths : 30 cm 50 cm 100 cm
Bouton poussoir rond vert Bouton poussoir rond vert

Green pushing switch

€10.00 (tax incl.)
This green pushing button switch is expected to be installed on a handlebar or a 22mm tube. On a bike or a motorcycle, it can be used to stop the motor when it's plugged in on the controller break brake or...
Bouton poussoir rond vert Bouton poussoir rond vert

Bouton poussoir rond rouge

€10.00 (tax incl.)
This red pushing button is expected to be installed on a handlebar or a 22mm tube. On a bike or a motorcycle, it can be used to stop the motor when it's plugged in on the controller break brake or disactivate the...
Interrupteur ON-OFF Interrupteur ON-OFF

Selecteur de mode (2 boutons poussoir)

€19.00 (tax incl.)
Double combined for handlebar installation or 22mm tube. Equipped with two pushing buttons, this product is perfect for activating the forward or backward motion by pressure on an industrial cart, golf cart or any...
Ralonge moteur avec phase et capteur HALL Ralonge moteur avec phase et capteur HALL

Motor cable extender 45cm and 1m anderson PP30 / JST

€20.00 (tax incl.)
Motor cable extender 45cm and 1m Extension for motor cable with 3x 2.00mm2 cables for the phases and 5x 0.22mm2 cables for the HALL sensors. The extensions are supplied with Anderson PP30 connectors for the phases...
cable Y JST 3 voies pour accélérateur cable Y JST 3 voies pour accélérateur

Y splitter cable 3 pins JST for throttle

€24.90 (tax incl.)
Y splitter cable to connect one throttle on both controllers. Allows to drive simultanouesly two motors with one throttle. 3 pins JST connectors compatible with OZO controllers 25A, 35A, 40A, 60A and Kelly...
Interrupteur 2 positions rond vert ON-OFF pour vélo Interrupteur 2 positions rond vert ON-OFF pour vélo

Black brake push button for bike.

€12.00 (tax incl.)
This push button is designed for installation on a 22mm handlebar or tube. On a bicycle or motorcycle, it can be used to ground the engine, deactivate the cruise control, or activate the horn. On a cart, it can be...
Interrupteur 2 positions rond vert ON-OFF pour vélo Interrupteur 2 positions rond vert ON-OFF pour vélo

Thumb throttle with switch for ebikes

€29.00 (tax incl.)
his accelerator for electric bicycles is activated with the thumb. Cable length: 1m This model is versatile, meaning you can install it on the right or left side of your handlebar. This set includes a waterproof...
Interrupteur ON-OFF Interrupteur ON-OFF

Double two positions switches handset

€19.00 (tax incl.)
This handset including two switches (2x positions switches) can be used to start the system or switch on the lighting or in order to select between the forward/backward motion. Suitable with every 22mm diameter...
Interrupteur ON-OFF Interrupteur ON-OFF

Double positions siwtches handset

€14.00 (tax incl.)
Double positions siwtches handset for handlebar installation or 22mm tube. Delivered with a 2 ways JST connector and a 1100mm cable length
Poignée accélérateur bouton poussoir Poignée accélérateur bouton poussoir

Push-button throttle

€35.00 (tax incl.)
Give your electric vehicle precise and responsive control with this motorcycle-style throttle, specially designed for electric bikes, scooters, e-motorcycles, and e-scooters. Thanks to its ergonomic design and robust...
Interrupteur 2 positions rond vert ON-OFF pour vélo Interrupteur 2 positions rond vert ON-OFF pour vélo

Thumb throttle with switch for ebikes

€29.00 (tax incl.)
his accelerator for electric bicycles is activated with the thumb. Cable length: 1m This model is versatile, meaning you can install it on the right or left side of your handlebar. This set includes a waterproof...

Find here all the accessories compatible with your OZO 25A or 35A controller and for our OZO industrial controllers

Read moreShow less
Close
Click for more products.
No products were found.

Settings

Click for more products.
No products were found.

Menu

Please sign in first.

Sign in