Composant ki

Mounting pack for electric kit

€10.00 (tax incl.)

For any purchase of an electric kit OZO (radiated motor + controller + accelerator or pedal crank) a mounting pack is offered to facilitate the installation of your electric kit and make it reliable.

Pedal sensor for generic OZO controller

€19.00 (tax incl.)

Pedal sensor compatible with the generic 250W controller for the repair of electric bikes. 2 models available: Integrated 12 magnets or V7 6 magnets The V7 comes with a 6-magnet magnetic washer. Cable length of 60...

KELLY battery cable with 150A Anderson connector

€35.00 (tax incl.)

Standard cable with special lugs for screw terminal block of KELLY controllers. Standard length: 35cm / Optional extension possible: 50cm, 1m, Cable section: 10AWG / 5mm2 + after wired contact to switch on the...

600W brushless electric motor for kayak

€249.00 (tax incl.)

This 600W brushless electric motor has been specially developed to quickly add electric assistance to a traditional inflatable or rigid kayak. If your kayak comes with an original fin, you can install this...

Electric retrofit motor for motocycle or karting

€249.00 (tax incl.)

This central rotor Brushless PMSM electric motor is designed to deliver a power of 1000W at 72V, generating a torque of 12 Nm. This is equivalent to a thermal power of 2CV. It will be perfect for retrofitting a...

Limited special offer

COUPURE FREIN A DISQUE HYDRAULIQUE

€84.00 (tax incl.) €99.00

Easily add a motor cut-off to your electric bike equipped with hydraulic brakes!This hydraulic brake provides powerful, progressive braking and integrates an electric cut-off compatible with JULET 2-PIN male red...

Interrupteur ON-OFF

€10.00 (tax incl.)

KELLY battery cable with 50A Anderson connector

€25.00 (tax incl.)

Standard cable with special lugs for screw terminal block of KELLY controllers. Standard length: 35cm / Optional extension possible: 50cm, 1m Cable section: 10AWG / 5mm2 + after wired contact to switch on the...

Roue motrice industrielle 200mm frein disque

200mm electric wheel motor for industrial and logistics trucks for disc brake

€399.00 (tax incl.)

We offer a 200 mm diameter brushless electric wheel motor specially designed for the electrification of industrial forklifts, as well as any other rolling stock used in intralogistics or on a production site. This...

Electric retrofit motor for motocycle or karting

Central 1500W electric motor for small motorcycles, dirt bikes, pit bikes.

€399.00 (tax incl.)

This Brushless PMSM Electric Motor (Permanent Magnet Inner Rotor Motor) with Hall effect sensors is designed to deliver a power of 1500W at 48V, generating a torque of 25 N.m and a maximum rotational speed of 4800...

Limited special offer

COUPURE FREIN A DISQUE HYDRAULIQUE

€139.00 (tax incl.) €149.00

Easily add a motor cut-off to your e-bike equipped with hydraulic brakes! This high-performance 4-piston hydraulic brake delivers powerful and progressive braking, and features an integrated motor cut-off sensor...

Capteur pédalier V5

€19.00 (tax incl.)

Half handle accelerator with push button

€25.00 (tax incl.)

This "half-handle" type accelerator incorporates a push button that can allow you to turn the engine off when connected to the controller's "brake off" input or to disable the cruise control or activate the horn built...

3 position switch for OZO controller

€15.00 (tax incl.)

Three-position switch to attach to the handlebar of your bike and connect to the dedicated connector of the OZO dual sensorless / sensored controller in order to benefit from three different power modes which are...

Adaptateur 5 trous côté transmission pour boitier compact

pedelec magnet ring holder adapter

€10.00 (tax incl.)

These adapters allow to install the pagnet ring of your pedelec sensor on any bottom bracket standard.

Contact brake MT5e

€144.90 (tax incl.)

Can fit on OZO kits with 15A and 22A controller. Original length of the hose 2m20Hydraulic system.

3500W BLDC brushless central motor

€399.00 (tax incl.)

3500W BLDC brushless central motor Max speed is 3000 RPM under 48V, 3750 RPM under 60V and 4500 RPM under 72V. Maw torque is 50N.m Ideal to convert 50cc or 80cc into electric.

KELLY motor cable with XT150 connector

€35.00 (tax incl.)

Standard motor cable with special lugs for screw terminal block of KELLY controllers. Standard length: 35cm / Optional extension possible: 45cm, 1,1m. Cable section: 10AWG / 5mm2 + after wired contact to switch on...