Composant ki

€10.00 (tax incl.)
For any purchase of an electric kit OZO (radiated motor + controller + accelerator or pedal crank) a mounting pack is offered to facilitate the installation of your electric kit and make it reliable.
€19.00 (tax incl.)
Pedal sensor compatible with the generic 250W controller for the repair of electric bikes. 2 models available: Integrated 12 magnets or V7 6 magnets The V7 comes with a 6-magnet magnetic washer. Cable length of 60...
€35.00 (tax incl.)
Standard cable with special lugs for screw terminal block of KELLY controllers. Standard length: 35cm / Optional extension possible: 50cm, 1m,  Cable section: 10AWG / 5mm2 + after wired contact to switch on the...
€249.00 (tax incl.)
This 600W brushless electric motor has been specially developed to quickly add electric assistance to a traditional inflatable or rigid kayak. If your kayak comes with an original fin, you can install this...
€249.00 (tax incl.)
This central rotor Brushless PMSM electric motor is designed to deliver a power of 1000W at 72V, generating a torque of 12 Nm. This is equivalent to a thermal power of 2CV. It will be perfect for retrofitting a...
COUPURE FREIN A DISQUE HYDRAULIQUE COUPURE FREIN A DISQUE HYDRAULIQUE
Limited special offer
€84.00 (tax incl.) €99.00
Easily add a motor cut-off to your electric bike equipped with hydraulic brakes!This hydraulic brake provides powerful, progressive braking and integrates an electric cut-off compatible with JULET 2-PIN male red...
€25.00 (tax incl.)
Standard cable with special lugs for screw terminal block of KELLY controllers. Standard length: 35cm / Optional extension possible: 50cm, 1m Cable section: 10AWG / 5mm2 + after wired contact to switch on the...
COUPURE FREIN A DISQUE HYDRAULIQUE COUPURE FREIN A DISQUE HYDRAULIQUE
Limited special offer
€139.00 (tax incl.) €149.00
Easily add a motor cut-off to your e-bike equipped with hydraulic brakes! This high-performance 4-piston hydraulic brake delivers powerful and progressive braking, and features an integrated motor cut-off sensor...
€25.00 (tax incl.)
This "half-handle" type accelerator incorporates a push button that can allow you to turn the engine off when connected to the controller's "brake off" input or to disable the cruise control or activate the horn built...
€15.00 (tax incl.)
Three-position switch to attach to the handlebar of your bike and connect to the dedicated connector of the OZO dual sensorless / sensored controller in order to benefit from three different power modes which are...
€144.90 (tax incl.)
Can fit on OZO kits with 15A and 22A controller. Original length of the hose 2m20Hydraulic system.
€399.00 (tax incl.)
3500W BLDC brushless central motor Max speed is 3000 RPM under 48V, 3750 RPM under 60V and 4500 RPM under 72V. Maw torque is 50N.m Ideal to convert 50cc or 80cc into electric.
€35.00 (tax incl.)
Standard motor cable with special lugs for screw terminal block of KELLY controllers. Standard length: 35cm / Optional extension possible: 45cm, 1,1m. Cable section: 10AWG / 5mm2 + after wired contact to switch on...
€9.90 (tax incl.)
12x magnets ring for pedelec sensor. Brand : Kingmeter Drive side and opposite side available. For easier installation you can use our support available here
€399.00 (tax incl.)
This 5000W motor gets 55mmm magnets and can accepts up to 5000W power and 1000Km/h speed. Weight : 10, kg | dropout : 150mm Pmax = 5000W / Pnom = 4000W Max torque = 145N.m Kv 10 Tr/min/Volt
€25.00 (tax incl.)
Standard motor cable with special lugs for screw terminal block of KELLY controllers. Standard length: 35cm / Optional extension possible: 45cm, 1,1m. Cable section: 10AWG / 5mm2 + after wired contact to switch on...
€390.00 (tax incl.)
This 500W-1000W electric brushless universal motor offers the ability to choose different wheel diameters and tire widths with its removable aluminum machine casted rim flanges. The ability to remove the rims makes...
€29.00 (tax incl.)
This Wattmeter is the ideal tool for all those who wish to have a reliable autonomy and power gauge. It will allow you to have an accurate reading of the battery voltage, the power consumed and the energy consumed....
€20.00 (tax incl.)
Bafang ebrake for BBS01 BBS02 BBSHD Maxdrive Can also be plugged on any ebikes with Julet waterproof connector 3 pins.
€20.00 (tax incl.)
Standard cable with special lugs for screw terminal block of KELLY controllers. Standard length: 35cm / Optional extension possible: 50cm, 1m, 1.5m Cable section: 13AWG / 2,5mm2 + after wired contact to...
€999.00 (tax incl.)
Special retrofit for boats, motorcycles, go-karts, ATVs, or sailboats, this IPM brushless electric motor with a central rotor is designed to deliver a power output of 6kW to 10kW depending on the supply voltage of...
€8.90 (tax incl.)
Ce support d'accessoire double peut etre installer facilement sur tous les guidons de diamètre 25 mm à 31.8 mm. Il vous permettra notamment d'installer votre display ainsi que la gachette d'accélérateur au pouce....
€12.90 (tax incl.)
This case will allow you to aesthetically fix your 15A 250W controller on the frame of your bike. The box is installed on the vertical frame tube using two clamps. Your frame tube should have a maximum diameter of...
€20.00 (tax incl.)
You lost your keys! This is the barrel identical to the batteries of the following SilverFish SSE-014 models: Hilltecks, Gitane, Moma Bike, CyclEurope, Moov In, TommyBike, Proxy cycles, Voltaway, Maa Bikes,...
€20.00 (tax incl.)
This 33cm brake cut is interesting for bicycles equipped with cable brakes and / or road handlebars or for those who wish to keep their original brake handles It is quick to install on the brake handle or caliper....

OZO offers a wide range of components for electric bicycles for the optimization or repair of electric bicycles with wheel motor or pedal motor.

Read moreShow less
Close
Click for more products.
No products were found.

Settings

Click for more products.
No products were found.

Menu