0

Composant ki

Pack montage pour kit électrique

Mounting pack for electric kit

€10.00 (tax incl.)
For any purchase of an electric kit OZO (radiated motor + controller + accelerator or pedal crank) a mounting pack is offered to facilitate the installation of your electric kit and make it reliable.
Capteur pédalier V5 Capteur pédalier V5

Pedal sensor for generic OZO controller

€19.00 (tax incl.)
Pedal sensor compatible with the generic 250W controller for the repair of electric bikes. 2 models available: Integrated 12 magnets or V7 6 magnets The V7 comes with a 6-magnet magnetic washer. Cable length of 60...
KELLY battery cable with 150A Anderson connector

KELLY battery cable with 150A Anderson connector

€35.00 (tax incl.)
Standard cable with special lugs for screw terminal block of KELLY controllers. Standard length: 35cm / Optional extension possible: 50cm, 1m,  Cable section: 10AWG / 5mm2 + after wired contact to switch on the...
Electric motor for kayak Electric motor for kayak

600W brushless electric motor for kayak

€249.00 (tax incl.)
This 600W brushless electric motor has been specially developed to quickly add electric assistance to a traditional inflatable or rigid kayak. If your kayak comes with an original fin, you can install this...
Moteur central 15000W Moteur central 15000W

Electric retrofit motor for motocycle or karting

€249.00 (tax incl.)
This central rotor Brushless PMSM electric motor is designed to deliver a power of 1000W at 72V, generating a torque of 12 Nm. This is equivalent to a thermal power of 2CV. It will be perfect for retrofitting a...
COUPURE FREIN A DISQUE HYDRAULIQUE COUPURE FREIN A DISQUE HYDRAULIQUE
Limited special offer

COUPURE FREIN A DISQUE HYDRAULIQUE

€84.00 (tax incl.) €99.00
Easily add a motor cut-off to your electric bike equipped with hydraulic brakes!This hydraulic brake provides powerful, progressive braking and integrates an electric cut-off compatible with JULET 2-PIN male red...
KELLY battery cable with 50A Anderson connector

KELLY battery cable with 50A Anderson connector

€25.00 (tax incl.)
Standard cable with special lugs for screw terminal block of KELLY controllers. Standard length: 35cm / Optional extension possible: 50cm, 1m Cable section: 10AWG / 5mm2 + after wired contact to switch on the...
COUPURE FREIN A DISQUE HYDRAULIQUE COUPURE FREIN A DISQUE HYDRAULIQUE
Limited special offer

COUPURE FREIN A DISQUE HYDRAULIQUE

€139.00 (tax incl.) €149.00
Easily add a motor cut-off to your e-bike equipped with hydraulic brakes! This high-performance 4-piston hydraulic brake delivers powerful and progressive braking, and features an integrated motor cut-off sensor...
Accélérateur gachette au pouce Accélérateur gachette au pouce

Half handle accelerator with push button

€25.00 (tax incl.)
This "half-handle" type accelerator incorporates a push button that can allow you to turn the engine off when connected to the controller's "brake off" input or to disable the cruise control or activate the horn built...
Intérupteur 3 positions 3 position switch for OZO controller

3 position switch for OZO controller

€15.00 (tax incl.)
Three-position switch to attach to the handlebar of your bike and connect to the dedicated connector of the OZO dual sensorless / sensored controller in order to benefit from three different power modes which are...
Frein à contact Frein à contact

Contact brake MT5e

€144.90 (tax incl.)
Can fit on OZO kits with 15A and 22A controller. Original length of the hose 2m20Hydraulic system.
Moteur central 3500W Moteur central 3500W

3500W BLDC brushless central motor

€399.00 (tax incl.)
3500W BLDC brushless central motor Max speed is 3000 RPM under 48V, 3750 RPM under 60V and 4500 RPM under 72V. Maw torque is 50N.m Ideal to convert 50cc or 80cc into electric.
KELLY motor cable with XT150 connector

KELLY motor cable with XT150 connector

€35.00 (tax incl.)
Standard motor cable with special lugs for screw terminal block of KELLY controllers. Standard length: 35cm / Optional extension possible: 45cm, 1,1m. Cable section: 10AWG / 5mm2 + after wired contact to switch on...
Capteur pédalier intégré pour contrôleur 15A et 22A Capteur pédalier intégré pour contrôleur 15A et 22A

12x magnets ring for pedelec sensor

€9.90 (tax incl.)
12x magnets ring for pedelec sensor. Brand : Kingmeter Drive side and opposite side available. For easier installation you can use our support available here
5000W motorcycle bike rear wheel motor 5000W motorcycle bike rear wheel motor

5000W motorcycle bike rear wheel motor

€399.00 (tax incl.)
This 5000W motor gets 55mmm magnets and can accepts up to 5000W power and 1000Km/h speed. Weight : 10, kg | dropout : 150mm Pmax = 5000W / Pnom = 4000W Max torque = 145N.m Kv 10 Tr/min/Volt
Controller Kelly motor cable Controller Kelly motor cable

Controller Kelly motor cable

€25.00 (tax incl.)
Standard motor cable with special lugs for screw terminal block of KELLY controllers. Standard length: 35cm / Optional extension possible: 45cm, 1,1m. Cable section: 10AWG / 5mm2 + after wired contact to switch on...
Moteur Moteur

Agriculture electric wheel 500W universal brushless motor

€390.00 (tax incl.)
This 500W-1000W electric brushless universal motor offers the ability to choose different wheel diameters and tire widths with its removable aluminum machine casted rim flanges. The ability to remove the rims makes...
Wattmètre sans connecteur Wattmètre sans connecteur

150A Wattmeter 5V to 60V DC

€29.00 (tax incl.)
This Wattmeter is the ideal tool for all those who wish to have a reliable autonomy and power gauge. It will allow you to have an accurate reading of the battery voltage, the power consumed and the energy consumed....
Poignée de frein à contact pour Bafang BBS01 BBS02 BBSHD Poignée de frein à contact pour Bafang BBS01 BBS02 BBSHD

Bafang brake ebrakes

€20.00 (tax incl.)
Bafang ebrake for BBS01 BBS02 BBSHD Maxdrive Can also be plugged on any ebikes with Julet waterproof connector 3 pins.
Controller Kelly Battery cable Controller Kelly Battery cable

PP30 battery cable for kelly controller

€20.00 (tax incl.)
Standard cable with special lugs for screw terminal block of KELLY controllers. Standard length: 35cm / Optional extension possible: 50cm, 1m, 1.5m Cable section: 13AWG / 2,5mm2 + after wired contact to...
10 kw Electric retrofit motor watercooling 10 kw Electric retrofit motor watercooling

Central electric motor 10kW brushless liquid cooling

€999.00 (tax incl.)
Special retrofit for boats, motorcycles, go-karts, ATVs, or sailboats, this IPM brushless electric motor with a central rotor is designed to deliver a power output of 6kW to 10kW depending on the supply voltage of...
Support double pour guidon Support double pour guidon

double accessories adapter Ø25 - 31.8mm

€8.90 (tax incl.)
Ce support d'accessoire double peut etre installer facilement sur tous les guidons de diamètre 25 mm à 31.8 mm. Il vous permettra notamment d'installer votre display ainsi que la gachette d'accélérateur au pouce....
Boite ABS pour fixer les controleurs 17A sur le cadre Boite ABS pour fixer les controleurs 17A sur le cadre

15A 250W controller box frame mount

€12.90 (tax incl.)
This case will allow you to aesthetically fix your 15A 250W controller on the frame of your bike. The box is installed on the vertical frame tube using two clamps. Your frame tube should have a maximum diameter of...
Neiman Neiman

Neiman

€20.00 (tax incl.)
You lost your keys! This is the barrel identical to the batteries of the following SilverFish SSE-014 models: Hilltecks, Gitane, Moma Bike, CyclEurope, Moov In, TommyBike, Proxy cycles, Voltaway, Maa Bikes,...
coupure frein câble connecteur jst coupure frein câble connecteur jst

coupure frein câble connecteur jst

€20.00 (tax incl.)
This 33cm brake cut is interesting for bicycles equipped with cable brakes and / or road handlebars or for those who wish to keep their original brake handles It is quick to install on the brake handle or caliper....
rondelle entretoise pour axe moteur

Motor shaft spacers

€0.50 (tax incl.)
Motor shaft spacers are available for any kind of ebikes motor hub and allows to center the wheel inside the frame.
Moteur 500W 1000W brushless central inner rotor Moteur 500W 1000W brushless central inner rotor

Moteur 500W 1000W brushless central inner rotor

€199.00 (tax incl.)
Central brushless BLDC motor that can deliver 500W under 24V, 750W under 36V and 1000W unde 48V. Can drive any rotating tools or small kids electric  motorcycle or scooter. Max speed is 3500 Tr/min under 48V Max...
Bouton poussoir rond vert Bouton poussoir rond vert

Green pushing switch

€10.00 (tax incl.)
This green pushing button switch is expected to be installed on a handlebar or a 22mm tube. On a bike or a motorcycle, it can be used to stop the motor when it's plugged in on the controller break brake or...
Rayons longueurs standards Rayons longueurs standards

13G stainless steel spokes custom length

€1.45 (tax incl.)
We can cut spokes at your convenience. Conventional rolled 18/8 stainless steel spoke with constant wire diameter from the head to the thread. 13G spokes (2,3mm diameter)
Capteur pédalier pour CAV3 Capteur pédalier pour CAV3

Cycle analsyt V3 PAS sensor

€39.00 (tax incl.)
Pas sensor for Cycle analyst V3 CA V3. Can be installed on left side or right side of your bike.
Entreroise cassette

Cassette spacers

€2.00 (tax incl.)
Cassette spacer is needed if you want to install 7 or 8 speeds cassette on our Motor hub originally designed for 9 and 10 speeds. To install 7 speed cassette you can choose 3mm spacer. 1mm spacer for 8 speed cassette
Bouton poussoir rond vert Bouton poussoir rond vert

Bouton poussoir rond rouge

€10.00 (tax incl.)
This red pushing button is expected to be installed on a handlebar or a 22mm tube. On a bike or a motorcycle, it can be used to stop the motor when it's plugged in on the controller break brake or disactivate the...
Support inox karting Support inox karting

Stainless stell motor bracket

€160.00 (tax incl.)
Karting bracket in 316L stainless steel, available in 6mm and 8mm thickness. Designed for mounting in place of the combustion engine, directly on the flanges. Compatibility : -6mm thickness: 3.5kW and 6kW motors...
Cable de programmation

Cycle analyst cable

€20.00 (tax incl.)
This cable allows to update your cycle analyst with the last software version and also to read and set all datas on your computer.
Demi-poignée d'accélérateur avec bouton On Off Demi-poignée d'accélérateur avec bouton On Off

Half handle accelerator with 2 position button

€25.00 (tax incl.)
This half handle accelerator is compatible with all our kits. The two-position switch can be used to turn off the engine if it is wired to the "brake off" input of the controller or to power your lighting.
35A dual sensored/sensorless FOC controller 24V 36V 48V 35A dual sensored/sensorless FOC controller 24V 36V 48V

RH212 speedster OZO 35A controller 36V 48V

€169.00 (tax incl.)
The OZO 35A controller is specially designed for our speedster RH212 rear hub direct drive motor with waterproof connector Julet 1121AG. Can also fit front hub motor FH212 Only compatible with OZO vertical display...
Support inox karting Support inox karting

Karting electric motor frame

€90.00 (tax incl.)
Karting bracket in steel, available in 6mm and 8mm thickness. Designed for mounting in place of the combustion engine, directly on the flanges. Compatibility : -6mm thickness: 3.5kW and 6kW motors -8mm thickness:...
Contôleur 12v Contôleur 12v

Controller 12V 15A brushless sensorless

€40.00 (tax incl.)
12V 15A controller to power a brushless motor operating in 12V. Sensorless only. Ideal for powering scooter motors in 5" or 6" The controller has the safety function "pedal first", that is to say that it is...
Capteur pédalier intégré pour contrôleur 15A et 22A Capteur pédalier intégré pour contrôleur 15A et 22A

Integrated PAS sensor for OZO controller 15A and 22A

€20.00 (tax incl.)
Built-in integrated pedal sensor for square axle bottom brackets that have a minimum clearance of 4mm between crank and frame. Compatible with OZO Touring and Enduro kits. Very simple installation. Julet three-way...
coupure frein câble connecteur jst coupure frein câble connecteur jst

coupure frein câble connecteur jst

€15.00 (tax incl.)
This brake cut is interesting for bicycles equipped with cable brakes and / or road handlebars or for those who wish to keep their original brake handles It is quick to install on the brake handle or caliper....
Contacte magnétique pour frein hydraulique Contacte magnétique pour frein hydraulique

Hydraulic brake sensor

€15.00 (tax incl.)
Magnetic contact JST to activate the brake cut on a bicycle equipped with hydraulic brakes. For 25A and 35A OZO controller You keep your original hydraulic brakes.
Accélérateur gachette au pouce Accélérateur gachette au pouce

ATV type thumb trigger accelerator for ebike

€20.00 (tax incl.)
This ebike accelerator is thumb operated. An exact copy of the accelerators found on quads or water scooters. Note that you can only install this accelerator if you have previously removed a derailleur lever....
Contacte magnétique pour frein hydraulique Contacte magnétique pour frein hydraulique

Hydraulic brake sensor

€20.00 (tax incl.)
Magnetic contact to activate the brake cut on your 15A or 22A system while maintaining your original hydraulic brakes. Also compatible with all bikes equipped with a 2-way Julet connector. Length 34cm
Interrupteur ON-OFF Interrupteur ON-OFF

Selecteur de mode (2 boutons poussoir)

€19.00 (tax incl.)
Double combined for handlebar installation or 22mm tube. Equipped with two pushing buttons, this product is perfect for activating the forward or backward motion by pressure on an industrial cart, golf cart or any...
Rallonge moteur 9 PINS 110cm Rallonge moteur 9 PINS 110cm

Rallonge moteur 9 PINS 110cm

€15.00 (tax incl.)
Cable extension for electric bicycle hub motor with waterproof connector 9 Pins Julet Z910AT Available in three lengths: - 30cm - 45cm - 110cm
Contrôleur 24V 13A Contrôleur 24V 13A

Mini scooter controller 36V 250W

€45.00 (tax incl.)
Mini scooter or kick scooter controller 36V 250W. Pedal first function, lcd display, active regenerative braking with throttle
Qu'est ce qu'un Torque ARMS ? Qu'est ce qu'un Torque ARMS ?

Display for Bafang protocol

€79.00 (tax incl.)
OZO offers you to choose from three models of displays with Bafang protocol UART 5.2 and 5.8 with cylindric green 5 pins female connector. Compatible with all bbs series central motor from Bafang and some OZO hub...
Ralonge moteur avec phase et capteur HALL Ralonge moteur avec phase et capteur HALL

Motor cable extender 45cm and 1m anderson PP30 / JST

€20.00 (tax incl.)
Motor cable extender 45cm and 1m Extension for motor cable with 3x 2.00mm2 cables for the phases and 5x 0.22mm2 cables for the HALL sensors. The extensions are supplied with Anderson PP30 connectors for the phases...
Interrupteur 2 positions rond vert ON-OFF pour vélo Interrupteur 2 positions rond vert ON-OFF pour vélo

Black brake push button for bike.

€12.00 (tax incl.)
This push button is designed for installation on a 22mm handlebar or tube. On a bicycle or motorcycle, it can be used to ground the engine, deactivate the cruise control, or activate the horn. On a cart, it can be...
Cycle analyst V3 Cycle analyst V3

Cycle analyst V3 DPS

€199.00 (tax incl.)
The V3 Cycle Analyst is the next step for the CA product line to not only monitor what is going on in an ebike, but also control it. In the V2 CA we included basic throttle over-ride capabilities for speed, current,...
Shunt universel

Solar Current Sense for Cycle analyst V3

€45.00 (tax incl.)
16A Hall Effect Current Sensor for Solar CA V3 Firmware. This shunt is great for solar application such as long travel, suntrip... you will be able to check your production and consumption on the same CA V3 screen.
Interrupteur ON-OFF Interrupteur ON-OFF

Double two positions switches handset

€19.00 (tax incl.)
This handset including two switches (2x positions switches) can be used to start the system or switch on the lighting or in order to select between the forward/backward motion. Suitable with every 22mm diameter...
Interrupteur 3 positions pour CAV3 Interrupteur 3 positions pour CAV3

Cycle analyst V2 V3 analogger

€129.00 (tax incl.)
This Analogger can be plugged on Jack connector of your CA V2 or V3 to record all datas of your system and travel ( for GPS integrated version).
Demi poignée 2017 avec jauge batterie Demi poignée 2017 avec jauge batterie

Half handle with battery gauge 36V or 48V

€35.00 (tax incl.)
Half handle lock on type with battery gauge 36V or 48V. The LEDs give you an idea of the remaining energy in the battery: 20%, 50%, 100%. It incorporates a two-position switch
Interrupteur ON-OFF Interrupteur ON-OFF

Double positions siwtches handset

€14.00 (tax incl.)
Double positions siwtches handset for handlebar installation or 22mm tube. Delivered with a 2 ways JST connector and a 1100mm cable length
Jante MACH1 610 Jante MACH1 610

MACH1 260 rim 26'' to 28'' 36 holes for ebikes

€29.90 (tax incl.)
The MACH1 260 rim is a robust French-made rim for bicycles supporting heavy loads over thousands of kilometers. Available in 20 '', 24 '', 26 '', 27.5 '' and 28 '' 36 holes, double wall surfaced compatible with pad...
3-Way JST extension cable 3-Way JST extension cable

3-Way JST extension cable

€8.00 (tax incl.)
This extension cable has a 3-way JST connector for pedal sensor or accelerator. With switch 3-Position. Available in 3 lengths : 30 cm 50 cm 100 cm
Adaptateur éclairage Anderson vers 2 JULET Mâle Z209AG Adaptateur éclairage Anderson vers 2 JULET Mâle Z209AG

ANDERSON to JULET Z209AG adapter

€25.00 (tax incl.)
ANDERSON to JULET Z209AG adapter. Allows to install ebikes lights by connecting in series between batetry and controller
Base 1 Base 1

Pack Torque arm to screw M5 / M6

€19.00 (tax incl.)
The Torque Arm allows to limit the stress on the bike frame, at the level of the wheel fixing beaks, to avoid any deformation. It is highly recommended for kits over 400W.
ZEFAL Z Frame Pack frame bag ZEFAL Z Frame Pack frame bag

ZEFAL Z Frame bag for OZO controller and battery 100Wh

€20.00 (tax incl.)
The Z Frame Pack is a frame bag which is mounted on the horizontal tube at the rear. It is ideal for carrying tools, a mini pump, energy bars, a phone, a rain gear ... Dimensions: 270 x 100 x 80mm / 10.6 x 3.9 x...
TORQUE ARM VISSER 2 en INOX TORQUE ARM VISSER 2 en INOX

Torque Arm Frame clamp 1 in STAINLESS STEEL

€25.00 (tax incl.)
The base 3 is in stainless steel of 6.20mm thickness. To check the installation of the torque arm on your bike, you can print the plan below, cut the part and position it on the frame. Plan "Base 3 M12"
Electric motorcycle accelerator Electric motorcycle accelerator

Electric motorcycle throttle

€45.00 (tax incl.)
Idéal for electric motorcycle conversion. This throttle allows to keep the original mechanical throttle of your bike. You can use your standard cable or the one shipped with the throttle (600mm length) Electric...
Touring 250W rear wheel kit with 36V PVC battery Touring 250W rear wheel kit with 36V PVC battery

Kit 250W external 15A controller without motor and battery

€229.00 (tax incl.)
OZO 250W External Controller Kit - Repair and Upgrade for Electric Bikes The OZO 250W Controller Kit is the ideal solution for repairing or upgrading your electric bike. This complete kit includes a controller, a...
CA3 Digital Aux Input Grin Technologies CA3 Digital Aux Input Grin Technologies

CA3 Digital Aux Input Grin Technologies

€45.00 (tax incl.)
Slim digital up and down pushing buttons for limit setttings by pushing buttons as pedal assist limit. Requires a Cycle Analyst with version 3.1 or later firmware. Connects to white 3-pins Aux plug on CA3 device. 
5000W rear wheel motor agricultural and industrial 5000W rear wheel motor agricultural and industrial

5000W front wheel motor agricultural and industrial

€460.00 (tax incl.)
This 5000W motor gets 55mmm magnets and can accepts up to 5000W power. Weight : 9,8 kg | dropout : 150mm Pmax = 5000W / Pnom = 4000W Max torque = 170N.m Delivered with a 200mm cable length
cable Y JST 3 voies pour accélérateur cable Y JST 3 voies pour accélérateur

Y splitter cable 3 pins JST for throttle

€24.90 (tax incl.)
Y splitter cable to connect one throttle on both controllers. Allows to drive simultanouesly two motors with one throttle. 3 pins JST connectors compatible with OZO controllers 25A, 35A, 40A, 60A and Kelly...
Touring 250W rear wheel kit with 36V PVC battery Touring 250W rear wheel kit with 36V PVC battery

Touring 250W rear wheel kit with 36V PVC battery

€244.00 (tax incl.)
OZO 500W External Controller Kit - Repair and Upgrade for Electric Bikes The OZO 500W Controller Kit is the ideal solution for repairing or upgrading your electric bike. This complete kit includes a controller, a...
Controleur 15A externe Controleur 15A externe

250W 36V 15A external controller for OZO hub motors

€90.00 (tax incl.)
The OZO 15A Controller, equipped with Field-Oriented Control (FOC) technology, ensures optimal performance for OZO Brushless motors. Its IP6-rated tropicalization and waterproof connectors provide exceptional...
Touring 250W rear wheel kit with 36V PVC battery Touring 250W rear wheel kit with 36V PVC battery

Touring 250W rear wheel kit with 36V PVC battery

€269.00 (tax incl.)
OZO 500W External Controller Kit - Repair and Upgrade for Electric Bikes The OZO 500W Controller Kit is the ideal solution for repairing or upgrading your electric bike. This complete kit includes a controller, a...
Train épicycloïdale pour moteur Freerider et Donkey Train épicycloïdale pour moteur Freerider et Donkey

Planetary gear for Freerider and Donkey motor

€65.00 (tax incl.)
This epicyloidal gears can let you fix your OZO motors Freerider and Donkey but also some others brands as XOFO, XFV, XFVK, XFVF, Trotrx, Globe3T, Gravity, Cyclotec... Dimensions: External gear diameter : 54mm...
Foot Throttle Foot Throttle

Foot Throttle

€40.00 (tax incl.)
Electric  Foot Throttle Electric Scooter Foot Gas Pedals Voltage : 0-5V Lenght : 1.2m Connector : JST 3 pins
Qu'est ce qu'un Torque ARMS ? Qu'est ce qu'un Torque ARMS ?

Displays selection for wheel motor 250W to 750W

€79.00 (tax incl.)
OZO offers 3x different display models. The display is the screen on the ebikes handlebar. It shows all electrical and run datas such as battery state of charge, speed, distance and allows to select the assist power...
Controleur 15A externe Controleur 15A externe

15A Controller integrated in holder for frame battery

€115.00 (tax incl.)
The OZO 15A Controller, equipped with Field-Oriented Control (FOC) technology, ensures optimal performance for OZO Brushless motors. Its IP6-rated tropicalization and waterproof connectors provide exceptional...
Touring 250W rear wheel kit with 36V PVC battery Touring 250W rear wheel kit with 36V PVC battery

Touring 250W rear wheel kit with 36V PVC battery

€322.00 (tax incl.)
35A Conversion Kit for Direct Drive Motors (Motor and Battery not included) Upgrade your direct drive motor with a modern controller, a large color display, and a pedal assist sensor ✅ Kit Contents (excluding motor...
Controleur 15A externe Controleur 15A externe

22A Controller integrated in holder for frame battery

€130.00 (tax incl.)
The OZO 22A Controller, equipped with Field-Oriented Control (FOC) technology, ensures optimal performance for OZO Brushless motors. Its IP6-rated tropicalization and waterproof connectors provide exceptional...
Rayons longueurs standards

Black stainless steel spoke 10G 3mm

€2.00 (tax incl.)
Black stainless steel radius of 3mm diameter French manufacturing, rolled radius, constant wire diameter from the head to the thread. Sold individually with nut Several lengths available.
Poignée accélérateur bouton poussoir Poignée accélérateur bouton poussoir

Push-button throttle

€35.00 (tax incl.)
Give your electric vehicle precise and responsive control with this motorcycle-style throttle, specially designed for electric bikes, scooters, e-motorcycles, and e-scooters. Thanks to its ergonomic design and robust...
Under frame controller support Under frame controller support

Under frame controller support

€14.99 (tax incl.)
This bracket allows to fix the controller under the frame and to let the cables of the derailleur and the brake pass easily. 
Interrupteur 2 positions rond vert ON-OFF pour vélo Interrupteur 2 positions rond vert ON-OFF pour vélo

Thumb throttle with switch for ebikes

€29.00 (tax incl.)
his accelerator for electric bicycles is activated with the thumb. Cable length: 1m This model is versatile, meaning you can install it on the right or left side of your handlebar. This set includes a waterproof...
Interrupteur 2 positions rond vert ON-OFF pour vélo Interrupteur 2 positions rond vert ON-OFF pour vélo

Thumb throttle with switch for ebikes

€29.00 (tax incl.)
his accelerator for electric bicycles is activated with the thumb. Cable length: 1m This model is versatile, meaning you can install it on the right or left side of your handlebar. This set includes a waterproof...
Cycle analyst V3 Cycle analyst V3

Cycle Analyst V3 Universel

€229.00 (tax incl.)
The Cycle Analyst V3 is the most comprehensive on-board computer for electric bikes, offering all the functions of a premium display while allowing you to fine-tune system parameters such as response time,...
Wattmètre TK15H Wattmètre TK15H

TK15H wattmeter

€39.00 (tax incl.)
TK15H is a high precision current type battery capacity tester (also known as coulometer), which can test battery voltage, current and capacity to help users know the battery condition in time. TK15H have memory...
Controller 25A 12V 24V 36V 48V dual sensored/sensorless Controller 25A 12V 24V 36V 48V dual sensored/sensorless

60A BLDC FOC industrial Controller 24V 36V 48V

€199.00 (tax incl.)
The OZO controller 24V 36V 48V 60A integrates high quality electronic components from the automotive world. For electric motors above 1500W and up to 5000W Dual sensored / sensorless adaptive field-oriented...
TF03KH wattmeter TF03KH wattmeter

TF03KH Wattmeter - Coulometer 8V to 100V 100A or 350A

€49.00 (tax incl.)
TF03KH is a high precision current type battery capacity tester (also known as coulometer), which can test battery voltage, current and capacity to help users know the battery condition in time. TF03KH have memory...
LED stick gauge for Lithium battery

LED gauge for Lithium battery 12V to 72V

€9.90 (tax incl.)
Battery leds gauge for lithium batteries from 12V to 72V.  This gauge can be easily glued to any battery. This gauge is completely waterproof.
kit trott 16" jante en aluminium kit trott 16" jante en aluminium

16" electric wheel 1000W

€349.00 (tax incl.)
Brushless BLDC electric wheel 16'' Shipped with reinforced tire 16x2.125 (54-305). External diameter 410mm. Dropout = 100mm / Kv : 10 RPM/Volt / Torque 70N.m / max speed 25km/h under 36V - 35km/h under 48V
Electric Industrial motor wheel for trolley 5" Electric Industrial motor wheel for trolley 5"

Electric industry and leisure motor wheel 5"

€139.00 (tax incl.)
Brushless motor wheel to convert into electric any industrial trolley :  Leisure and service (golf cart, refrigerated cart, stroller, prototyping) Industrial (rolling base, industrial serving trolleys pusher...
Agriculture machine electric motor 3000W BLDC Agriculture machine electric motor 3000W BLDC

3kw electric wheel road tire disc brake

€369.00 (tax incl.)
3000W electric wheel motor brushless BLDC for wheelbarrow and agricultural machines, ideal for decreasing Human effort at work. Allows to carry up to 400kg under 48V DC, max torque 120Nm Including Standard tire 4.00 -...
Motorcycle 10KW motor rear wheel Motorcycle 10KW motor rear wheel

Motorcycle 15KW motor rear wheel

€2,199.00 (tax incl.)
Special retrofit, OZO presents the first electric motorcycle rim with a power of 15000W to transform your current motorcycle into a clean electric motorcycle. Compatible with most motorcycles with a 17 inch rear...
Electric Wheel motor 3000W 200Nm Electric Wheel motor 3000W 200Nm

Brushless electric hub motor 3000W 130Nm 45km/h 48V to 72V

€399.00 (tax incl.)
3000W electric hub motor to convert light vehicle into electric. Compatible with any rim drilled 4x100 and at least 10'' in diameter. 1000mm cable length 45km/h under 48V with 10'' wheel and 50km/h with 12'' wheel.
Electric Wheel motor 3000W Electric Wheel motor 3000W

Electric Wheel motor 10000W 450Nm

€1,399.00 (tax incl.)
10000W electric hub motor to replace all types of wheels on your agricultural machinery, ideal for making an electric vehicle for intensive use in difficult environments, torque 450Nm Mount your rim in 4x114.3 or...
Electric motor wheel 14" for mini scooter 24V 36V 48V Electric motor wheel 14" for mini scooter 24V 36V 48V

Electric brushless motor wheel 14" 1000W

€299.00 (tax incl.)
Electric brushless motor wheel 14" 1000W. Vmax 32Km/h under 48V - 25km/h under 36V (can be customized for B2B projects) Weight =  6,5 kg / Kv = 10 RPM/Volt / Poles number = 30
11 tooth sprocket for 5000W motor 11 tooth sprocket for 5000W motor

10 12 teeth sprocket for motorcycle motor central OZO

€30.00 (tax incl.)
 transmission gear for central electric motor OZO. Compatible with 1'' shaft (25,4mm) as all central motor from OZO : moteurs centraux OZO 10 teeth - pas 520 - key 6,35m (1/4'') 10 dents - pas 520 - key 8mm 12...
Wheelbarrow electric motor 1500W brushless Wheelbarrow electric motor 1500W brushless

Wheelbarrow agriculture electric motor 1500W brushless

€329.00 (tax incl.)
1500W electric wheel motor for wheelbarrow and agriculture machine, ideal for providing assistance for difficult and arduous work. Allows to move up to 200kg under 48V DC, max torque 100Nm Standard size of a...
Moteur DONKEY Moteur DONKEY

Donkey electric motor 500W wheel

€374.10 (tax incl.)
The DONKEY motor is a 500W front hub motor, ideal for cargo bikes with 20'' or 24'' wheels. 25km/h on a 20'' wheel with a 36V battery, or 32km/h under 48V. Geared electric hub motor.
Moteur roue avant BOBBER Moteur roue avant BOBBER

250W Front RUNNER electric Drive Wheel

€304.10 (tax incl.)
The RUNNER front hub motor is a 250W geared electric motor that delivers 40Nm of torque. Certified EN15194, the Bobber motor complies with EPAC (Electric Pedal Assisted Cycle) standards. This electric front hub...
Test Moteur Freeride Enzo Test Moteur Freeride Enzo

Freerider 500W 750W electric wheel

€404.10 (tax incl.)
The FREERIDER rear hub motor is the result of our development in the electric mountain bike (e-MTB) field since 2010. A geared brushless motor with an internal freewheel, it is designed to tackle all terrains and will...
Moteur BOBBER Moteur BOBBER

Rear electric wheel with BOBBER 250W rear hub cassette

€304.10 (tax incl.)
The BOBBER motor is a 250W electric hub motor. A geared hub motor, it delivers 40Nm of torque. Equipped with a cassette body compatible with SRAM and Shimano standards. Certified EN15194, the Bobber motor complies...
Moteur DD35 transport Moteur DD35 transport

DD35 rear hub motor Transport 1500W

€249.17 (tax incl.)
This large direct drive motor has a steel stator 35mm wide and a solid axis in 14mm, which allows him to cash a max power of 2000W and to offer a large torque. It will be perfect for the electrification of a scooter,...
Speedster RH212 complete electric wheel 1000W Speedster RH212 complete electric wheel 1000W

Speedster RH212 complete electric wheel 1000W

€428.20 (tax incl.)
The Speedster RH212 has the reputation of being the best direct-drive electric motor on the market. Well-known in the USA, demand is lower in Europe due to regulations, but many bicycle travelers are equipped with...
Spoked drive wheel Speedster FH212 Spoked drive wheel Speedster FH212

Spoked drive wheel Speedster FH212

€378.20 (tax incl.)
The FH212 is an upgraded version of the DD27, as its design provides more clearance for the brake caliper. Considered the best direct-drive motor on the market, it offers incomparable riding comfort and a high top...
Spoked drive wheel DD27 Speed Rear Moteur NineContinent RH205C

Spoked drive wheel DD27 Speed Rear

€304.10 (tax incl.)
The DD27 Speedster rear hub motor is a 1000W direct-drive motor, ideal for those seeking a fast and reliable motor for daily use with an unbeatable performance-to-price ratio. Powered by our 25A FOC controller, its...
Roue trottinette 8 Roue trottinette 8

Electric motor 200mm scooter 8'' 250W 350W

€119.00 (tax incl.)
This 200mm diameter motor (8'') is ideal for electrifying your classic scooter or any other cart or stroller equipped with 200mm wheels. Center distance = 45mm Power supply possible in 24V 36V and 48V. Comes with a...
Roue trottinette 12" 1/2 Roue trottinette 12" 1/2

Electric motor wheel 12" 500W 750W

€299.00 (tax incl.)
Mini scooter geared motor 12" 36V 48V 500W-750W Motor for mini scooter 12" Sold with 12" tire and inner tube (12,5 x 2,25) Vmax = 25km/h under 36V / 35Km/h under 48V Total weight with tire =  3,6 kg Cable length...
Moteur roue avant BOBBER Moteur roue avant BOBBER

250W Front ROLLER electric Drive Wheel

€304.10 (tax incl.)
The ROLLER front-wheel motor is a 250W electric hub motor of the reduced type, delivering 40N.m of torque. This motor is designed for the ROLLER BRAKE brakes generally found on Dutch bikes (Gazelle, Batavus,...
Moteur BOBBER thru-axle Moteur BOBBER thru-axle

Hornet thru-axle 12 x 142mm (ARRIVAL IN OCTOBER)

€249.17 (tax incl.)
Bobber is rear hub electric motor 36V 250W Light and efficient it's the right choice for city bike, folding bike or road bicycle. Bobber is available in 200RPM to reach 25Km/h. It's a geared motor with 1:4,43 ratio....
Agriculture machine electric motor 3000W BLDC Agriculture machine electric motor 3000W BLDC

Agriculture electric motor 3000W brushless with tire

€399.00 (tax incl.)
3000W electric wheel motor brushless BLDC for wheelbarrow and agricultural machines, ideal for decreasing Human effort at work. Allows to carry up to 400kg under 48V DC, max torque 120Nm Including agriculture tire...
Brushless electric hub motor 3000W 130Nm 45km/h 48V to 72V Brushless electric hub motor 3000W 130Nm 45km/h 48V to 72V

Brushless electric hub motor 3000W 130Nm 45km/h 48V to 72V

€549.00 (tax incl.)
3000W brushless electric hub motor for electrifying light vehicles, quadricycles, quads, robots, machines, etc. Ideal for building a license-free electric vehicle or a heavy-duty transport vehicle. 200Nm torque. Kv...
rear hub Fat Bike 250W 500W Freewheel light weight rear hub Fat Bike 250W 500W Freewheel light weight

rear hub Fat Bike 250W 500W Freewheel light weight

€249.17 (tax incl.)
Powerful, robust and ready for adventure, this 750W OZO wheel engine is designed especially for Fat Bikes. Suitable for demanding terrains, it combines high torque, reliability and freewheel compatibility. This engine...
Moteur central MAC 12980 Moteur central MAC 12980

1000W - 2000W central motor inner rotor MAC 12980

€399.00 (tax incl.)
Central brushless BLDC inner rotor motor to power tools or kids motorcycle or mini scooter. Brushless BLDC motor can be powered under 24V, 36V or 48V. Max power is 1000W under 24V, 1500W under 36V and 2000W with 48V...

OZO offers a wide range of components for electric bicycles for the optimization or repair of electric bicycles with wheel motor or pedal motor.

Read moreShow less
Close
Click for more products.
No products were found.

Settings

Click for more products.
No products were found.

Menu

Please sign in first.

Sign in